Large Temperature Displays
1/4 Din And 1/16 Din Analogue Set Low Cost Temperature Controllers - TDL AND TOS
Models TDL (1 / 4 DIN) and TOS (1 / 16 DIN) are general purpose low cost analogue set Temperature Controllers ideally suited to a wide variety of applications where simplicity of control action and knob setting is all that is required to meet the application. Both models accept Thermocouple inputs J and K or 2/3 wire PT100/RTD.
Both models feature a large setting dial knob with clear scale divisions for accurate setting. Setting accuracy is +/- 2% of full scale.
Model TDL features a 'deviation LED bar' with 10 red LED's to indicate deviation from set point which is indicated by a single arrow LED. Both models have single LEDs to indicate 'power on' and 'relay output' status.
| Input Type | Range | Specification |
|---|---|---|
| Thermocouple J | 0-200 C | Supply 110/240Vac |
| 0-400 C | Operating voltage 90-110% | |
| Thermocouple K | 0-200 C | Setting accuracy +/- 2% FS |
| 0-400 C | On/Off hysteresis 0.5 C. FS | |
| 0-600 C | Output 1 C/O 3A 250Vac | |
| 0-1200 C | Control ON/OFF | |
| 2/3 wire RTD | 0-100 C | Operating Temp. -10 to + 50C/14 - 131F |
| 0- 200 C | Operating RH 35-85% |
(Note: external allowable wire resistance Thermocouples 100 Ohm max. RTD 5 Ohms per wire)
Dimensions
- TOS - H48mm x W48mm x D79mm
- TDL - H96mm x W96mm x D100mm
Panel Cut-out
- TOS: 44mm x 44mm
- TDL: 91mm x 91mm
Wiring Connections - TOS
Wiring Connections - TDL
Anything we can tell you about our Analogue Set Temperature Controllers:
Tel: 01462 670566 or Email: info@eaglecontrols.co.uk