LARGE DIGITAL LED COUNTERS & RATE DISPLAYS

Our Large Digital LED Counters and Rate Displays will accept standard input signals, contact closure, 24Vdc, NPN, PNP, Quadrature and are available from 2 to 12 digits in heights from 2.3”-18”. UP or DOWN, BATCH or TOTALISING count,  single line or multiline, IP55 or IP65 ( NEMA 13 or NEMA 4 ).

Large Digital LED Counters and Rate Displays

WIDE VARIETY OF INDUSTRIAL INPUT SIGNALS

Contact Closure, 24Vdc, NPN,
PNP, Quadrature

INDOOR or OUTDOOR USE

Count Range from 2 digits to 12 Digits

High Brightness LEDs

LARGE DIGITAL LED COUNTERS & RATE DISPLAYS

GENERAL OVERVIEW – LED DIGITAL COUNTERS

These robust Digital LED Counters and Rate Displays are available with as few as 2 digits to as many as 12 LED digits in single line or multi line format.

They will accept all INDUSTRY STANDARD INPUTS

Contact Closure
24Vdc from a PLC
NPN
PNP
Quadrature

They are suitable for INDOOR or OUTDOOR applications with the appropriate IP and NEMA rating cases.

MAX COUNT SPEED

  • 3KHz

UP or DOWN COUNTING   ( Single Line )

UP COUNTING

The Large Digit LED COUNTERS are also called TOTALISERS, where from an input signal they will count UP either to the maximum range of the counter, or they can be programmed to STOP at a predetermined value and provide an output via a Relay,  for example, to start another related operation. The Large LED Counter can continue to count up after that event or it can be RESET.

DOWN COUNTING 

This type of Large Digit LED COUNTER is also called a BATCH COUNTER,   whereby a preset value is entered and then the counter is activated by input signal to count down from this value to ZERO or another preset value.

UP or DOWN COUNTING ( Dual Line or Multiline ) LED DISPLAYS 

Like the SINGLE line UP or DOWN Counters, a typical dual line counter provides two visual lines of information at all times –

TARGET           X X X X
ACTUAL           X X X X 

Here a TARGET ( Goal ) figure is entered ( for what is wanted ) and the ACTUAL figure is what is actually happening.

Sometimes a THIRD LINE is required to show TIME taken to achieve the TARGET.

There are many options open to individual application needs.

3 line Large Digital Counter Totaliser
Output and Target Large Digital Counter
Large Digit Display Rate per hour Counter and Totaliser

UP / DOWN COUNTING ( ADD & SUBTRACT ) LED DISPLAYS

Standard feature on all Counters

INPUTS / MULTI CHANNEL LED DISPLAYS

Standard 1 input but up 5 Input channels may be ordered

RATE LED DIGITAL DISPLAYS ( Speed )

Used extensively to display LINE SPEED in engineering units per  Hour,  Minute or Seconds via typically PNP inputs, or any other device where SPEED is a concern.  The maximum  RATE / COUNT SPEED is 3KHz.

Refresh option is available and the refresh time should be stated when ordering

Example :        The display will count input pulses for a minute and display that figure for a minute and then refresh the display after a minute to display the last minute run. These figures can be varied. 

Most applications would only require 4 or 5 digits and a decimal point is available.

Large Digital Rate Displays

FASCIA LEGENDS / SYMBOLS 

Any Legend can be factory fitted to depict your COUNT or RATE engineering unit.

NO EXTRA CHARGE IS MADE FOR THIS

Please advise what Legend you require at the time of ordering

MOUNTING OPTIONS of LARGE DIGIT COUNTERS & RATE DISPLAYS

PANEL MOUNT CASE

Limited to the 2.3” (58mm) and 4.0” (102mm) high digits,   these panel mount displays can be used Indoors or Outdoors.   This applies up to 6 digits for the 2.3” and  4.0”.

CASE   H ( height ) and L ( length )

3 Digit LED Display Panel Cut Out

2.3″ – H103 x L191mm + 53mm for legend
4.0″ – H158 x L311mm + 92mm for legend

4 Digit LED Display Panel Cut Out

2.3″ – H103 x L244mm + 53mm for legend
4.0″ – H158 x L403mm + 92mm for legend

5 Digit LED Display Panel Cut Out

2.3″ – H103 x L297mm + 53mm for legend
4.0″ – H158 x L495mm + 92mm for legend

6 Digit LED Display Panel Cut Out

2.3″ – H103 x L350mm + 53mm for legend
4.0″ – H158 x L587mm + 92mm for legend

Add 10 mm to H x L for facias for all

Large Digit LED Panel Mounted Case Dimensions

SUSPENSION MOUNT

(Chains for Ceiling or Gantry not supplied)

Popular for DOUBLE SIDED DISPLAYS.

Large digit display case Suspension Mounting with Chains

WALL MOUNTING

Wall mounting cases are supplied with adjustable side brackets with a ‘ TILT ‘ facility

OVERALL CASE DIMENSIONS in millimeters ( without brackets )  FOR 2.3”,  4.0”, 6.0”.   Please consult sales office for larger height digits.

CASE   H ( height ) and L ( length )

2.3” ( 58mm ) digit height

2 Digit  H100 x L151 x D61
3 Digit  H100 x L198 x D61
4 Digit  H100 x L251 x D61
5 Digit  H100 x L304 x D61
6 Digit  H100 x L357 x D61
8 Digit  H100 x L463 x D61

4.0” ( 102mm ) digit height

2 Digit  H155 x L226 x D61
3 Digit  H155 x L318 x D61
4 Digit  H155 x L410 x D61
5 Digit  H155 x L502 x D61
6 Digit  H155 x L594 x D61
8 Digit  H155 x L778 x D61

6.0” ( 160mm ) digit height

2 Digit  H240 x L350 x D95
3 Digit  H240 x L460 x D95
4 Digit  H240 x L650 x D95
5 Digit  H240 x L800 x D95

Wall mounting diagram

LARGE DIGIT HEIGHT OPTIONS

Height LED Digit options 2.3” (58mm) 4” (102mm) 6” (152mm) 8” (203mm) 12” (305mm) 14” (355mm) 16” (405mm) 18” (457mm) 

LED DISPLAY VIEWING DISTANCES

The viewing distances shown below are true to the LED manufacturers specifications and will give CLEAR UNAMBIGUOUS READING – They are NOT to be taken as Maximum distances.

Eye sight differs from person to person, we have given a fair distance for consideration.

DIGIT HEIGHTS

VIEWING DISTANCES

ActualGuide Only
2.3” (58mm)15 meters / 50 feet
4” (102mm)35 meters / 115 feet
6” (150mm)55 meters / 180 feet
8” (203mm)75 meters / 246 feet
12” (305mm)115 meters / 377 feet
14″ (355mm)135 meters /442 feet
16” (400mm)155 meters / 508 feet
18″ (457 mm)170 metres / 557 feet

IP / NEMA ( USA ) ENVIRONMENT PROTECTION RATINGS

All our displays are IP54 / NEMA 13 and IP65 / NEMA 4 rated.

DAYLIGHT VIEWING LED – HIGH BRIGHTNESS

Hi brightness LEDS are used for all OUTDOOR applications but in situations of murky INDOOR atmospheres/environments these can also be fitted to ensure visibility at all times.

POWER SUPPLY OPTIONS

95~265Vac
24Vdc
12Vdc

GENERAL SPECIFICATIONS of LARGE DIGITAL LED COUNTERS & RATE DISPLAYS

LED COLOURS AVAILABLE

  • 2.3” (58mm) Red LED Display or Green LED Display
  • 4.0” (102mm) Red LED Display or Green LED Display
  • 4.0” (102mm) Red LED Display Green LED Display  Colour change at presets

LAST DIGIT ROUND UP ( RATE DISPLAYS ONLY )

Programmable 5, 10

DECIMAL POINT POSITIONING ( RATE DISPLAYS ONLY )

1, 2, 3, 4 places depending on scale range

ENVIRONMENTAL OPERATING CONDITIONS

-10 ~ 45 °C / 14 ~ 113 °F

Specification Sheets

Our specification sheets provide you with all the information contained on this web page in a PDF printable form. 

To download a specification sheet complete the CONTACT FORM below and if you tick the box requesting a specification sheet then you will be directed to the downloads page.

How Can We Help? 

Whatever your Large Digit LED Display requirements are we are sure we can help. Contact Us Now for further information.

To help us provide a realistic quotation we will need as much of the following information as possible.

DIGIT HEIGHT     2.3”, 4.0”, 6.0”

FUNCTION   Counter UP, Counter DOWN, Rate

INPUT TYPE  Contact Closure, NPN, PNP, 24V Plc or Quadrature

DECIMAL POINT   RATE DISPLAYS ONLY

NUMBER OF DIGITS   2 to 12

NUMBER OF LINES Single Line or Multi Line

MOUNTING TYPE    Wall, Panel or Suspension

INSTALLATION   Indoor or Outdoor

POWER INPUT   95~265Vac,  24Vdc or  12Vdc


Contact Form - Counters and Rate Displays

"*" indicates required fields

Name*
Address*

Your Counter and Rate Display Requirements

How Can We Help You?

Do You Want To Download A Specification Sheet
If you have ticked this option then after you have completed this form you will be redirected to our downloads page. There you will be able to download PDF versions of the details of all our displays.
Do You Want To Join Our Newsletter Mailing List
This field is for validation purposes and should be left unchanged.

Not what you are looking for?

Here is our full range of Large Digital LED Displays

A to D (Analogue to Digital) Displays

Our LED Digital A to D Displays accept all standard industrial input signals Voltage and Current and all are  scalable. 

These LED displays will display any engineering units with decimal point position programmable.

Clock and Temperature Displays

Our LED Digital Clocks set a new Industry standard.   Time bases Hours : Minutes : Seconds or Hours : Minutes. 

The Clocks also allow the display of Date / Year and Temperature alternating. 

Counters and Rate Displays

Our LED Digital Counters will accept standard input signals, contact closure, 24Vdc, NPN, PNP, Quadrature.

UP or DOWN, BATCH or TOTALISING count,  single line or multiline.

Timers and Totalisers

All Timers have a Time base in Hours, Minutes, Seconds and combinations. Long Range Timers with Years, Weeks and Days are also available. 

Typical functions are UP or DOWN timing, Totalising or Batch timing, TAKT timing, Repeat Cycle, One-Shot output.

Industrial Temperature Displays

These displays accept Industry Standard Thermocouple Inputs and 2/3 wire PT100/RTD sensors.   With a wide range of Temperature scale ranges in °C or °F.

Commercial Temperature Displays

Ideal for the Food industry, Chillers, Freezers as well as Office and work area room Temperature comfort. In-built NTC sensor.  Scale ranges are limited to Low Temperature applications.

Temperature and Humidity Displays

These Large Digital LED Displays combine Temperature and Humidity on two separate displays in a single case with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.

Cold Store Temperature Displays

These Large Digital LED Cold Store Temperature Displays have been specifically designed for the Refrigeration market.  Suitable for Walk in Refrigerators, Freezers, Cold Stores, Cold Rooms, Chillers and Cold Cabinets.