LARGE DIGITAL TEMPERATURE AND HUMIDITY DISPLAYS
DUAL CIRCUIT INPUT, 4~20mA or 0-10Vdc or Remote sensor Inputs
Alarms and Retransmission Output options, Analogue, Voltage or Serial
These displays combine Temperature and Humidity on two separate displays ( in a single case ) with an integral 4~20mA dual input sensor or a dual 0-10Vdc input signal.
The 4~20mA sensor protrudes into the AIR from the bottom of the case ( sensor shown below ).
LARGE DIGITAL LED TEMPERATURE AND HUMIDITY DISPLAYS
FEATURES AND OPTIONS
- Digit heights, 2.3”, 4.0”, 6.0”, 8.0”, 12.0”, 14.0”, 16.0”, 18.0”
- Scale ranges
- TEMPERATURE 0~99 °C / 32~210 °F, 0~99.9 °C / 32~212 °F
- HUMIDITY 0~99 % or ( RH Legend )
- Indoor or Outdoor
- Wall or Suspension mounting
- 95~265Vac, 24Vdc or 12Vdc power input options
- Input options 4~20mA or 0-10Vdc
- Red or Green LED options ( consult sales office )
- Alarm or Retransmission Output options
MOUNTING OPTIONS of LARGE DIGITAL DISPLAYS
LED DISPLAY WALL MOUNTING
Wall mounting cases up to 6” high digits are supplied with side brackets that can rotate in their mounting to enable the display to be ‘ TILTED ‘. 8” high digit displays and above are normally supplied with four welded corner brackets for direct fixing to a wall. The reason for the difference is purely weight. If an 8” high digits displays only has 2 or 3 digits and single line, it too can have side adjusting brackets. 12” and above are always with fixed.
LED DISPLAY SUSPENSION MOUNTING
This method of mounting is popular for Double Sided or Multiline displays which have to be seen by a section of workers. Several suspension mounting displays can be installed in a work area. Dimensions are not given here as they vary according to Digit Height, Number of Digits and Number of Lines as well as whether the Large Display is Single or Double sided.
Suspension Picture Example Only
Our specification sheets provide you with all the information contained on this web page in a PDF printable form.
To download a specification sheet complete the CONTACT FORM below and if you tick the box requesting a specification sheet then you will be directed to the downloads page.